Tungsten carbide coil winding nozzle

86-769-86016320

chaolang@hartai.com

Products

Coil winding wire guide Nozzle((Tungsten Carbide nozzles)also call wire guide tubes,wire guide eyelets or wire guide needles,it is used on coil winding machine.it is made precisely of hard alloy and enjoys the hardness up to HRA90.Two terminals andinnerle are all receive mirror surface treatment to ensure enameled wire makes no scrape. High hardness, resistance to flexure, block and impact .

Features:
1. High Wear Resistance
This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.

No.	Item	Name	Model No.(mm)
No.	Item	Name	L	L1	D	D1	d1	d2	H
R2系列
1	T2-001	W0435-2-1010	35	10	2	1.0	0.4	0.4	---
2	T2-002	W0535-2-1210	35	10	2	1.2	0.5	0.5	---
3	T2-003	W0435-2-1207	35	7	2	1.2	0.4	0.4	---
4	T2-004	W0220-08-0602	20	2	0.8	0.6	0.2	0.2	---
5	T2-005	W0530-1.5-1007	30	7	1.5	1	0.5	0.5	---
6	T2-006	W0530-2-1007	30	7	2	1	0.5	0.5	---
7	T2-007	W0535-2-1210	35	10	2	1.2	0.5	0.5	---
8	T2-008	W0435-2-1007	35	7	2	1	0.4	0.4	---
9	T2-009	W0330-2-0808	30	8	2	0.8	0.3	0.3	---
10	T2-010	W0326-2-1007	26	7	2	1	0.3	0.3	---
11	T2-011	W0530-2-1010	30	10	2	1	0.5	0.5	---
12	T2-012	W0835-2.5-2011	35	11	2.5	2	0.8	0.8	---
13	T2-013	W0330-2-1006	30	6	2	1	0.3	0.3	---
14	T2-014	W0635-2-1215	35	15	2	1.2	0.6	0.6	---
R3系列
1	T3-001	W0330-3-1007	30	7	3	1.0	0.3	0.3	---
2	T3-002	W0430-3-1007	30	7	3	1.0	0.4	0.4	---
3	T3-003	W0530-3-1010	30	10	3	1.0	0.5	0.5	---
4	T3-004	W0530-3-1008	30	8	3	1	0.5	0.5	---
5	T3-005	W0630-3-1008	30	8	3	1	0.6	0.6	---
6	T3-006	W0330-3-0807	30	7	3	0.8	0.3	0.3	---
7	T3-007	W0630-3-1309	30	9	3	1.3	0.6	0.6	---
8	T3-008	W0614-3-1509-5p	14	9	3	1.5	0.6	0.6	5
9	T3-009	W1014-3-1509-5p	14	9	3	1.5	1	1	5
10	T3-010	W0414-3-1009-5p	14	9	3	1	0.4	0.4	5
11	T3-011	W1030-3	30	---	3	---	1	1	---
12	T3-012	W0326-3-	26	---	3	---	0.3	0.3	---
13	T3-013	W0626-3	26	---	3	---	0.6	0.6	---
14	T3-014	W1030-3	30	---	3	---	1.0	1.0	---
15	T3-015	W1230-3	30	---	3	---	1.2	1.2	---
16	T3-016	W0330-3	30	---	3	---	0.3	0.3	---
17	T3-017	W0626-3	26	---	3	---	0.6	0.6	---
18	T3-018	W0330-3-0504	30	4	3	0.5	0.3	0.3	---
19	T3-019	W0825-3	25	---	3	---	0.8	0.8	---
20	T3-020	W0435-3	35	---	3	---	0.4	0.4	---
21	T3-021	W03535-3	35	---	3	---	0.35	0.35	---
22	T3-022	W1025-3	25	---	3	---	1	1	---
23	T3-023	W0845-3	45	---	3	---	0.8	0.8	---
24	T3-024	W1535-3	35	---	3	---	1.5	1.5	---
25	T3-025	W1036-3	36	---	3	---	1	1	---
26	T3-026	W0630-3	30	---	3	---	0.6	0.6	---
27	T3-027	W0830-4	30	---	4	---	0.8	0.8	---
28	T3-028	W1243-4-0P	43	---	4	---	1.2	1.2	20
29	T3-029	W0832-4-0P	32	---	4	---	0.8	0.8	20
30	T3-030	W1243-4.5	43	---	4.5	---	1.2	1.2	---
31	T3-031	W1543-4-2512P	43	12	4	2.5	1.5	1.5	20
32	T3-032	W0820-3.9-2019P	20	19	3.9	2	0.8	0.8	19
33	T3-033	W2020-5	20	---	5	---	2	2	---